Óleo térmico para limpeza de aquecedores e Tubulações
(Unidades pequenas de controle de temperatura)
O Paratherm SC® óleo térmico de limpeza é formulado para dissolver e suspender pedaços
de carbono produzidos com freqüência em unidades de controle de temperatura onde fluidos de transferência de calor a base de glicol foram utilizados. O Paratherm SC é um fluido multifuncional que é compatível com qualquer fluido térmico
de base óleo mineral e compatível também com muitos fluidos sintéticos.
O Paratherm SC pode ser reutilizado caso a matéria sólida caia para o fundo do recipiente e seja filtrada. E quando finalmente não puder ser mais utilizado, o óleo pode ser combinado com outras matérias químicas comuns e eliminado convencionalmente.
Para obter mais informações, envie um email para firstname.lastname@example.org
Instructions for Use
NOTE: Cleaning and maintaining your hot oil temperature control system will be a lot easier if you replace the drain plug with a valve mounted externally.
Drain existing fluid while warm if possible.
Replace drain plug with ball or globe valve.
Bottom-fill system with fluid so that reservoir tank has approximately 1″ to 2″ of fluid in bottom, or enough to start pump.
Circulate cold for 3 to 4 hours. If reservoir needs to be cleaned, run discharge hose into tank through vent or open vent to agitate fluid in tank.
Let system soak overnight.
Start system up and circulate from 1 to 4 hours. Fluid works faster when warm. Heat to max of 150°F if possible.
NOTE: Do not circulate through expansion tank while system is hot.
If required, turn off heat and allow fluid to cool with pump running.
When fluid temperature reaches ambient (80°F), begin to drain fluid while pump is still operating. Shut off pump when pressure begins to fluctuate. Continue draining system.
Refill system with Paratherm fluid or any compatible mineral oil-based product. Set temperatures at 150°F and circulate for 1-2 hours. Shut down and drain immediately. Repeat if odor still present.
Refill system with Paratherm heat transfer fluid and put unit back into service.
The SC liquid is available in 5-gallon pails and 55-gallon drums. Shipment is via UPS and motor freight, and is shipped same-day if we have your purchase order by 10:00 AM.
Our technical expertise is available to you in the conceptual stage, during planning and design, and through system construction, start-up and operation. We want to work closely with you in the recommendation of proven thermal fluidsystems, components, supplies and procedures.
We also advise on system cleaning and repair,should these become necessary. And if yourapplication calls for fluids that we are unable toprovide, Paratherm will assist you with the names and phone numbers of competitors’ engineers that can help.
Paratherm has available technical data sheets covering a variety of thermal fluid and systemtopics including fire prevention, system performancetracking, recommended components,draining, flushing and charging and fluid analysis, among others. We’d be pleased to forward these to you upon request.